PVC SG-6, China PVC SG-6 Abavelisi, Suppliers, Factory

I-PVC Resin		SG3	SG5	SG8
Viscosity, ml/g(okanye K ixabiso)		135-127 (72-71) 1350-1250	118-107 (68-66) 1100-1000	86-73 (59-55) 750-650
Inani lesuntswana lokungcola≤		30	30	40
Umxholo oguquguqukayo %,≤		0.40	0.40	0.40
Ubuninzi obubonakalayo g/ml≥		0.42	0.45	0.45
Intsalela Emva kweSieve	0.25mm, ≦	2.0	2.0	2.0
Intsalela Emva kweSieve	0.063mm, ≥	90	90	90
Inani leenkozo / 400cm2≤		40	40	50
Ixabiso le-Plasticizer absorbency ye-100g resin g≥		25	17	-
Ubumhlophe %,≥		75	75	70
I-conductivity yesisombululo sokutsalwa kwamanzi, 【us/(cm.g)】≤		5	-	-
Isiqulatho esishiyekileyo sekloreyi thylene mg/kg≤		10	10	10
Intsalela ye-Ethyidenedichlorideug/g		150	150	150

PVC resin SG3
umcimbi	Specification			Linganisa d Ixabiso
umcimbi	IBanga eliPhezulu	IBanga lo kuqala	IBanga elifanelekileyo	Linganisa d Ixabiso
Inombolo yeViscosity,ML/G	127 ~ 135	127 ~ 135	127 ~ 135	131
Iqhezu elinzima le-Volatile Matter (kubandakanywa namanzi)	≤0.3%	≤0.4%	≤0.5%	≤0.2%
Uxinano olubonakalayo, g/mL	≥0.45	≥0.42	≥0.4	≥0.51
Nciphisa kwiSieve, 250μmSieve mesh≤Sieve	1.6%	2%	8%	0.9%
Nciphisa kwiSieve, 63μmSieve mesh≥Sieve	97%	90%	85%	99%
"Iliso lentlanzi"/400cm2≤	20	30	60	10
Ubumhlophe(160°C,10min)≥	78%	75%	70%	83%
100g Resin Plasticizer Ukufunxa,g≥	26	25	23	27
Inani leNcam yokungacoceki ≤	16	30	60	12
Ukuqhutywa kokukhutshwa kwamanzi,uS/cm.g ≤	5	5	---	0.6
Umxholo weVinyl Chloride Monomer eshiyekileyo,ug/g≤	5	5	10	1.6

PVC resin SG5
umcimbi	Specification			Linganisa d Ixabiso
umcimbi	IBanga eliPhezulu	IBanga lo kuqala	IBanga elifanelekileyo	Linganisa d Ixabiso
Inombolo yeViscosity,ML/G	118 ~ 107			111.24
Iqhezu elinzima le-Volatile Matter (kubandakanywa namanzi)	≤0.4%	≤0.4%	≤0.5%	≤0.4%
Inombolo yesuntswana lokungcola ≤	16	30	80	16
Uxinano olubonakalayo, g/mL	≥0.48	≥0.45	≥0.42	≥0.519
Nciphisa kwiSieve, 250μmSieve mesh≤Sieve	2%	2%	8%	0.9%
Nciphisa kwiSieve, 63μmSieve mesh≥Sieve	95%	90%	85%	98%
"Iliso lentlanzi"/400cm2≤	20	40	90	8
Ubumhlophe(160°C,10min)≥	78%	75%	70%	81.39%
100g Resin Plasticizer Ukufunxa,g≥	19	17	---	22.28
Umxholo weVinyl Chloride Monomer eshiyekileyo,ug/g≤	5	10	30	1

PVC resin SG8
umcimbi	Specification
Inombolo yeViscosity, ML/G	73-86
Inani leNcam yokungacoceki ≤	20
Ubuninzi beqhekeza le-Volatile Matter (kubandakanywa namanzi) ≤	0.4%
Uxinano olubonakalayo, g/mL≥	0.52
Nciphisa kwiSieve, 250μmSieve mesh≤Sieve	1.6%
Nciphisa kwiSieve, 63μmSieve mesh≥Sieve	97%
"Iliso lentlanzi"/400cm2≤	30
100g Resin Plasticizer Ukufunxa,g≥	12
Ubumhlophe(160°C,10min)≥	75%
Umxholo weVinyl Chloride Monomer eshiyekileyo,mg/l≤	5

isicelo:

Imoto yangaphakathi, izinto zokuhombisa usapho, ibhokisi yokukhanya yentengiso, iityhubhu zezihlangu, imibhobho yePVC, iiprofayili zePVC, iphepha lePVC kunye nepleyiti, ifilimu eqengqelekayo, iithoyi ezinokuphephetheka, iimveliso zangaphandle, intambo yePVC kunye nentambo, i-PVC yesikhumba eyenziweyo, iplanga kunye nomgangatho weplastiki, ibhodi yethati. , njl.

I-PVC SG-3 yeyemiboniso bhanyabhanya, ithumbu, izithwathwa, iintambo zocingo kunye nezinye iinjongo jikelele iimveliso ezithambileyo

I-PVC SG-5 yeyemibhobho, izinto zokufakelwa, iiphaneli, ikhalenda, inaliti, ukubumba, iiprofayili kunye neembadada.

I-PVC SG-7/SG-8 yeyeebhotile, amaphepha, ikhalenda, inaliti eqinileyo kunye nemibhobho yokubumba.

zonke iindidi

I-PVC SG-6

Mveliso e ngakumbi

I-PVC SG-1

I-PVC SG-3

I-PVC SG-5

I-PVC SG-8

uphando

amanqaku

iimveliso

Dibana no